or make 4 interest-free payments of fortnightly with More info
sE Electronics SE5 Stereo Matched Pair of Small Diaphragm Condenser Microphones
We've taken the sE5's predecessor, the sE4, and redesigned it from the capsule right through to the XLR connector. We believe the sE5 sets the new standard for small diaphragm microphones at its price, and is perfect for any use - studio or live. With an even smoother full-range frequency response and improved transient handling, it is the perfect choice for recording drums, percussion, pianos and any stringed acoustic instrument.
The sE5's cardioid polar pattern delivers a clean and smooth on-axis response, with off-axis rejection that's essential when recording the source instrument in-situ among unwanted noise sources such as other instruments or room ambience.
The sE5's 100Hz bass cut can be applied to decrease the level of proximity effect, which is typical behavior in cardioid pattern microphones if placed very close to the sound source, or to isolate from low frequency rumble from other sources.
The two pad switches can be used if you're recording a very ‘hot’ (loud) signal. For miking up loud sound sources such as drums or a guitar cabinet, the -10dB or -20dB settings will reduce the level output from the microphone to the connected microphone preamp, ensuring a high quality signal is delivered.
The matte black finish minimizes the level of visual attention drawn to the microphone when used on stage or in the studio, allowing it to blend into the background.
Every sE5 includes a custom-designed shock mount in the box, which is essential in use to reduce the unwanted effects of vibration or knocks to the supporting microphone stand. The mounting mechanism is sprung, for quick and easy insertion or removal of the mic.
sE5 Factory-Matched Stereo Pair
This configuration also includes a precision stereo mounting bar, and the whole setup comes packaged inside a secure flight case that's ready for the road.
Capsule Type: Hand-Crafted True Condenser
Diaphragm: 23mm Gold/Mylar
Directional Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Impedance: 200 Ohms
Sensitivity: 19.95 mV/Pa (-34dB)
Max SPL: 139/149/159 dB (0/-10/-20 dB pad) (0.5% THD @ 1kHz)
Signal to Noise Ratio: 80 dB
Self Noise: 14 dB(A)
Pass Filter Switch: 100 Hz
Preattenuation Pad: -10/-20 dB
Matching Connectors: XLR3F
Power requirement: 48V phantom
Weight: 230g / 8.11oz
- Tim Dolbear, Eclectica Studios, Mix Magazine - sE Artist
- Adam Lee, guitarist (YouTube Channel) - sE Artist
- Trevor Curwen, Future Music / Music Radar
- Hollin Jones, AskAudio Magazine
12 Months sE Electronics Australian Warranty